TOPPING MX5 Headphone DAC Amplifier Class D Power Amp 70Wx2 NFCA 1600mWx2 USB/OPT/COAX/Bluetooth/TRS/RCA Input Desktop Home Audio Decoder 384kHz/DSD256 with Remote Control (Black)

Product Information

In addition to supporting various digital inputs, MX5 also supports fully balanced TRS and single-ended RCA analog inputs. Greatly expand the scope of application. Topping MX5 houses multiple digital and analog input/output options including USB, Coaxial, Optical, Bluetooth, RCA, and TRS input options. It supports automatic on/off across all the input options. When a valid signal is detected the MX5 gets automatically turned on. When the valid signal is lost the device automatically goes into the Standby mode.

MX5 provides two custom setting memories, C1 and C2. Long press can memorize the current input selection, output selection, volume setting, bass setting, treble setting, and gain setting. And short press to call out in subsequent applications. It greatly facilitates your use. Let us know how the PA3s + DX3 Pro+ works out for you. I can tell you that the PA5 is dead silent, so that's an option too, although the cosmetic match will not be as nice. The EX5 is normally higher price than the MX5. If you can have them at the same price, the EX5 would probably be the safer bet due to the noise issues and such many are having with the MX5. Otherwise sound quality should be great with both. The limited kind of tone controls stereo amps have never appealed to me, but that's of course subjective. The MX5 has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely. The built-in headphone amp allows you to enjoy music by yourself without disturbing others.First time I have had a desktop amp that does well on *both* headphones and speakers. For the last 3 years I have been using a SMSL AD18 - which the MX5 has just replaced. I was never impressed with the USB DAC on the AD18... It did a fine job of amplifying analogue signals but I found it quite poor when decoding audio from USB at any resolution. The real killer was I had begun experiencing loud random white noise episodes at 96Khz. I thought this may be an issue with my new laptop and/or Windows 11 but apparently it is known thing with the AD18 on prior versions of Windows too. Guess I had not used the USB interface at high resolution much. Topping MX5 houses Infineon Menus class D power amplifier. It achieves a 70Wx2 output power rating at 4Ω of load (THD+N 10%). At high-quality THD+N 1%, the MX5 outputs up to 55Wx2 clean power (4Ω). At 8Ω load, the Topping MX5 outputs up to 42Wx2 (10% THD+N), and 35Wx2 (1% THD+N). MX5’s screen can be set to automatically close and only display the current input without any operation for 30 seconds. Az állatorvosok szerint Bobi, a nemrégiben elhunyt alentejo masztiff nem lehetett 31 éves 2023.10.30. With the help of Infineon Merus Class D amplifer, MX5 can output 70Wx2 under 4 ohm load 10% distortion, 55W x2 under 4-ohm load 1% distortion. Under 8-ohm load, 10% distortion can output 42Wx2, and 1% distortion can output 35W x2, which can meet daily use. For analog signals of different strengths, MX5 provides three options of sensitivity to ensure that the signal can be accurately detected, which greatly expand the scope of application.

At times I connect my Bose NC700 to the DAC and it provides decent sound. I don't play very loud but the quality is good. The dac also remembers volumes when switching between input sources. ha hozzávesszük, hogy ezt az élményt akár éjjel is élvezhetjük, amikor a gyerekek mondjuk már aludnának, akkor azért könnyen elmagyarázható, hogy miért jó dolog ez a fejhallgatózás. A térérzet egy kicsit más volt, mint a hangfalnál, kicsit talán keskenyebb volt a színpad, viszont a sztereó hatás nagyszerű volt. Jean Michel Jarre zenéjébe újra beleszerettünk például. Összegzés MX5 is certificated Hi-Res Audio, it uses ES9018QC decoding chip and 2nd generation 8 core XMOS XU208 for USB input, and dopts newest QCC3031 chipset to support SBC/AAC/APTX LL/ APTX HD protocols. These bring excellent performance to the MX5 with USB, optical fiber, coaxial, Bluetooth input, allow the MX5 to easily access a variety of audio sources including computers, set-top boxes, CD players, mobile phones, tablets.Topping MX5 has a two-level gain mode which can be adjusted in both power amp as well as headphone amp mode. It allows the users to use both sensitive IEMs as well as demanding headphones with the device easily. Custom Settings Memory:-

Note: The digital signal detection is turned on by default. When the digital input signal is invalid, the automatic shutdown waiting time is 1 minute. The analog signal detection is turned off by default. When turned this function on, the automatic shutdown waiting time is 10 minutes.There is a rough timeline on the product availability and once it has been confirmed with the brand, we will inform you. MX5 built-in ESS SABRE HIFI DAC, with XMOS XU208 & Qualcomm QCC3031, bring excellent performance to the MX5 with USB, optical fiber, coaxial, Bluetooth input. This allows the MX5 to easily access a variety of audio sources including computers, set-top boxes, CD players, mobile phones, tablets, etc.